Concrete floors last longer and perform better after treatment with Seal Hard.

The unique formulation of Seal Hard results in a internally sealed concrete floor that will outshine all others, and gets better over time.

Seal Hard is the only Concrete sealer system to offer a 10 Year Guarantee.

[green_tick_1_list width=”100%”]

• 1. You want your floor to last longer.

  Seal Hard deeply penetrates and becomes a part of the concrete. It densifies your floor for life and makes it amazingly resistant to the scratching and micro-pitting that otherwise transforms an unprotected floor into a “dust generator.” Seal Hard increases the strength of the concrete surface and adds many years of useful life to your floor. Long after other floor treatments disintegrate, your Seal Hard floor will still stand strong and clean.

  Seal Hard floors last longer.

• 2. You want the toughest concrete floor.

  Seal Hard densifies concrete floors. Through a unique chemical reaction, Seal Hard penetrates deeply and reduces the surface porosity of the floor. Whether used alone or with mineral aggregate dry-shake floor hardeners, Seal Hard increases your floor’s surface toughness by densifying the cement paste. Seal Hard treated floors are greatly resistant to abrasion and wear.

  Seal Hard floors are protected.

• 3. You want to increase profits.

  The installed cost of a new Seal Hard floor is significantly less than the cost of preparation and installation of top-coatings such as epoxy or urethane sealers. A single application is all it takes for most floors. But the real cost savings kick in after installation. Your Seal Hard floor will have no film to scratch, peel, or discolor. Unwanted tire marks are a thing of the past. Seal Hard makes your floor resistant to spills and wear. That means your floor won’t show its history of everyday abuse. Good floor maintenance will simple mean regular sweeping and washing. Your long-term costs are virtually eliminated.

  Seal Hard floors cost less.

• 4. You need a safe floor.

  From start to finish you’re safe with Seal Hard. Seal Hard is odorless, environmentally safe, and totally free of VOC solvents.

  Seal Hard’s safety benefits extend to your floor, too. Some treatments make floors more slippery but Seal Hard doesn’t alter the natural non-slip characteristics of the concrete finish.

  Seal Hard floors are safe floors.

• 5. You want a protected concrete floor.

  The top 1/4 inch (5mm) of a concrete floor is called the Near Surface Wear Zone. It’s this part of the floor that takes all the abuse from use and protects the rest of the concrete from outside world, from chipping, irreversible staining, abrasion, and general deterioration. Seal Hard seals, hardens, and densifies the Near-Surface Wear Zone through a permanent chemical bond.

  Independent testing by Construction Technology Laboratories, confirms that Seal Hard outperforms leading competitors in the protection of this critical quarter inch of concrete floors.

  Seal Hard protects concrete where it counts.

• 6. You want a low-maintenance concrete floor.

  Over a period of weeks and months, you’ll watch your Seal Hard floor develop an easy-to-clean, long-lasting, satin sheen. Your Seal Hard floor will polish over time with regular, easy maintenance.

  Seal Hard floors get better with age. You simply can’t say that about other floor treatments.

  The beauty of Seal Hard wears in. Not out.

• 7. You want a guaranteed floor

  You can be confident in the quality of your Seal Hard floor. Thousands of Seal Hard customers, some owning millions of square feet of protected Seal Hard floors themselves, are enjoying the benefits of dust-free, easy-to-maintain concrete floors.

  You’ll find those floors in all types of businesses, including warehouses, distribution centers, food processing plants, bakeries, factories, pharmaceutical and electronics manufacturing, automotive repair facilities and retail stores. Seal Hard has been approved by the USDA for food processing areas, and conforms completely to EPA, state and local air quality standards. All that makes this part easy: Seal Hard is backed by a rock-solid, labor and material, ten-year guarantee.

  Seal Hard floors are guaranteed.

• 8. You want professional installation.

  Seal Hard is backed by an international network of experienced and professional approved applicators to assure you of the finest floors in the industry. Only the best equipped, most knowledgeable floor technicians carry the L&M Seal Hard Certification.

  Your approved applicator will determine the best and most efficient way to apply Seal Hard in your particular situation, delivering a guaranteed floor with little to no down-time.

  While optional, most companies find the Seal Hard Approved Applicator program to be one of the most attractive features of Seal Hard floors.

  Seal Hard’s Approved Applicator program guarantees your complete satisfaction.

[/green_tick_1_list]

SEAL HARD is a proprietary, colorless, environmentally safe chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. SEAL HARD penetrates concrete surfaces to seal, dustproof, densify and harden them. SEAL HARD floors last longer, cost less to maintain, are safe to use, and are guaranteed to resist dusting for years after application.

Through a chemical-ion exchange process, SEAL HARD develops internal bonds which densify the concrete substrate into a hardened, chemically-cured, homogeneous concrete mass that dustproofs, resists abrasion, and reduces oil and water penetration.. This chemical-ion densifying process begins immediately upon treatment and continues through the initial six months following application, at which time the treatment becomes complete and permanent.

With its odorless, VOC free formula, SEAL HARD is environmentally safe to use. SEAL HARD is also safe to own. The deeply penetrating chemical action leaves no film and will not alter the natural non-slip texture of the concrete floor. Treated floors conform toADAand OSHA requirements.

SEAL HARD treated floors provide a significant savings in maintenance costs over conventional acrylic, epoxy and urethane sealers. SEAL HARD will not yellow, discolor, chip, peel or show unsightly wear patterns with use. SEAL HARD treated floors resist tire marks. In fact, the more a SEAL HARD floor is used and as it matures, the better it looks and more durable it becomes.

Basic Use: SEAL HARDis recommended for use in high performance areas subjected to fork lift and tow motor traffic: warehouses, distribution centers, manufacturing plants, textile mills, bottling plants, coolers and freezers, food processing plants, canning factories, breweries, bakeries, meat and poultry processing plants, service garages, grocery stores, discount retail stores, hub transfer facilities.

Other uses include concrete floors subjected to heavy pedestrian traffic, such as: civic centers, sports arenas, stadiums, hospitals, airports, museums, schools and grocery stores; parking decks, sewage treatment plants, dairies, fish processing plants, refineries and water treatment plants.

SEAL HARD Technical Information

SEAL HARD penetrates concrete surfaces to seal, densify, harden and waterproof them

SEAL HARD is a proprietary, colorless chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. SEAL HARD penetrates concrete surfaces to seal, densify, harden and waterproof them. SEAL HARD floors last longer, cost less to maintain, are safe to use, and are guaranteed to resist dusting for years after application. It is VOC-compliant, odorless, environmentally safe and simple to apply.

Hardens concrete substrate to resist abrasion, and reduces oil and water penetration

Through a chemical-ion exchange process, SEAL HARD develops internal bonds, which densify the concrete substrate into a hardened, chemically-cured, homogeneous, concrete mass that resists abrasion, and reduces oil and water penetration. This chemical-ion exchange process begins after treatment and continues through the initial six months following application.

Odorless, leaves no film, and will not alter the non-slip texture of the concrete floor

With its odorless formula, SEAL HARD is safe to use. SEAL HARD is also safe to own. The deeply penetrating chemical action leaves no film and will not alter the natural non-slip texture of the concrete floor.

Will not yellow, discolor, chip, peel, or show unsightly wear patterns and tire marks

SEAL HARD treated floors provide a significant savings in maintenance costs over conventional acrylic, epoxy and urethane sealers. SEAL HARD will not yellow, discolor, chip, peel or show unsightly wear patterns with use. SEAL HARD will not tire mark. In fact, the more a SEAL HARD floor is used and matures, the better it looks.

SEAL HARD concrete sealer, densifier, chemical hardener: Basic Use

SEAL HARD is recommended for use in areas subjected to fork lift and tow motor traffic: warehouses, distribution centers, manufacturing plants, textile mills, bottling plants, coolers and freezers, food processing plants, canning factories, breweries, bakeries, meat and poultry processing plants, service garages, grocery stores, discount retail stores, hub transfer facilities.

Uses include concrete floors subjected to heavy pedestrian traffic

Other uses include concrete floors subjected to heavy pedestrian traffic, such as: civic centers, sports arenas, stadiums, hospitals, airports, museums, schools and grocery stores; parking decks, sewage treatment plants, dairies, fish processing plants, refineries and water treatment plants.