Floor Masters is the NZ distributor of L & M Construction Chemicals including their range of floor levelling and wear resistant floor toppings.
[super_box width=”100%” border=”0px” backgroundColor=”#fff” insetShadow=”on” rounded=”on” pagecurl=”off”]
DuraTop HP
DURATOP HP is a flowable, natural metamorphic aggregate which produces a highly abrasion and chemical resistant solution for abusive impact and concrete floor wear conditions. DURATOP HP consists of a blend of abrasive-resistant aggregates of silica oxide, aluminum oxide and iron oxide along with a blend of cement which helps to assure a dense, tough floor that is resistant to impact and abrasive wear and allows for return to service in as little as 48 hours. DURATOP HP floors are also resistant to the destructive attacks of mild organic acids, alkalis, oils and are rust free. DURATOP HP is more wear resistant than 6000 psi (41.4 MPa) concrete. DURATOP HP resists moisture deterioration and is harder and more abrasion resistant than other mineral aggregate toppings. Its unique formulation provides a substantial savings in material cost when compared to other toppings. In addition to superior performance, this flowable formulation can be placed and finished like concrete. These superior physical properties make DURATOP HP an excellent choice for heavy-duty industrial service Class 6 and 7 floors, as described by ACI in its Manual of Concrete Practice standard, ACI 302.1R.
[/super_box]
[super_box width=”100%” border=”0px” backgroundColor=”#fff” insetShadow=”on” rounded=”on” pagecurl=”off”]
DuraFloor HP
DURAFLOOR HP covers your existing worn or pitted concrete surface, giving your floor a fresh, attractive & durable finish. The overlay rapidly gains strength to allow pedestrian and vehicle traffic or mechanical polishing within 24 hours after placement.
DURAFLOOR HP is a high strength, self-leveling concrete overlay topping that is easy to place.
DURAFLOOR HP rapidly sets and can be dyed with L&M’s Vivid Dye and then polished with L&M’s FGS PermaShine Concrete Polishing System. This attractive, fast curing material can be integrally colored for additional decorative effect.
- Use DURAFLOOR HP to cover worn, uneven and pitted existing concrete floors in large and small areas that require a highly durable and polishable repair material.
- Use DURAFLOOR HP to renovate and correct irregularities in uneven and worn structural floors, including light manufacturing, malls, retail stores, warehouses and lobbies.
[/super_box]
[super_box width=”100%” border=”0px” backgroundColor=”#fff” insetShadow=”on” rounded=”on” pagecurl=”off”]
DuraFloor TGA
DURAFLOOR TGA is a unique blend of cements, polymers, color and mineral aggregates to be used to resurface existing concrete surfaces. It combines the durability of concrete with color and decorative aggregate to produce a high-performance floor with enduring beauty.
Durafloor TGA floors are trowel applied 10mm” to 12mm thick, cured, then polished.
Basic Use: Use wherever you want an attractive, exposed concrete floor such as commercial lobbies, institutional floors, shopping centers, schools, theaters, and restaurants
FEATURES & BENEFITS
- Creates a highly polished surface
- Built-in permanent color and texture
- Reduces surface wear and dusting
- Resembles concrete, aggregate appearance
- Extremely durable finish
- Can be dyed or integrally colored
[/super_box]
[super_box width=”100%” border=”0px” backgroundColor=”#fff” insetShadow=”on” rounded=”on” pagecurl=”off”]
EmeryTop 400
For the most abrasion resistant, heavy duty floor topping, we recommend EMERYTOP400. This flowable, natural emery aggregate floor topping produces a very durable floor. EMERYTOP400 provides an economical, abrasion resistant solution to very severe and abusive concrete floor conditions where other solutions have failed.
EMERYTOP400 uses polyhederal shaped isostructures of emery as its primary aggregate base. Our natural emery aggregate contains nature’s highest content of aluminum oxide and ferric oxide for unsurpassed toughness. This unique aggregate has a hardness (Mohs scale rating) approaching that of industrial diamonds. EMERYTOP400produces a dense, cohesive mass that is rust-free, chemically resistant and results in a thick floor surface for maximum abrasion and impact resistance. EMERYTOP400 floors are also resistant to the destructive attacks of mild organic acids, alkalis and oils.
EMERYTOP400 outperforms normal concrete and high strength iron topping floors. EMERYTOP400 resists moisture deterioration, and is harder and more abrasion resistant than iron aggregate toppings. Its unique formulation provides a substantial savings in material cost when compared to iron toppings. In addition to superior performance,EMERYTOP400’s flowable formulation can be placed and finished like concrete. These superior physical properties makeEMERYTOP400 an excellent choice for heavy duty industrial service Class 6 and 7 floors, as described by ACI in its Manual of Concrete Practice standard,ACI 302.1R.
[/super_box]